Concrete Water Impermeability Tester (B-245)
- Used for determining the depth of penetration of water under pressure.
- Cubic, prismatic or cylindrical specimens having maximum dimensions of 200 x 200 x 200 mm can be tested.
- Once the concrete specimens clamped, the water under known pressure is applied.
- The water penetrated to the specimen is measured either by taking the reading through the graduated burette or by breaking the specimen.
- Monometer fixed on the front panel is supplied to check water pressure.
- Supplied less with air compressor. Air compressor should be ordered separately at the time of inquiry.
Technical Specifications
- Cubic, prismatic or cylindrical specimens
- (max. 200 x 200 x 200 mm) can be tested.
- Monometer fixed on the front panel is supplied to check water pressure.
